The motor drives the rotors to rotate quickly in the crushing chamber. Materials enter the crusher through the feed opening, and then they are being hit, cut and grinded into smaller particles by hammers. There is a sieve plate under the rotor, so the materials of which sizes are smaller than the sieve size will be sieved out and others will be left to be further stricken and ground until they can be sieved out.
Heavy type hammer crusher is designed on the basis of hammer crusher, vertical shaft hammer crusher and other crushers with mechanical principle of impact crushing. It can be used to handle all kinds of stones, coal and construction wastes.
The feed opening can reach 1600mm, and the capacity can reach 3000 tons per hour. The design of crushing chamber is more aerodynamic, which increases the through put and makes the capacity 30% higher than other crushers. It can also handle the wet materials and solves the problem of chamber jam.
Combining crushing and reshaping, large feeding size, adjustable discharge size. One crusher replaces the traditional three stages’ crushing, which reduces the investment by 35%.
4.Adjustable discharge size
Changing the way of controlling the products size with grizzly, the heavy type hammer crusher adjusts the products size just by adjusting the bolts. The large bulks evade actively, which decreases the abrasion of hammer and prolongs the life span of hammers by 4-6 times.
Helicoid design makes the shell can burden higher impact and protects the shell from deformation. Manganese chrome hammers have long life span. Lining plates spread of all over the crushing chamber protecting the machine from being damaged.
Eight hammer pin holes, four holes for spare. The machine body set multiple observation doors to check the operation of the machines. Large models are equipped with hydraulic device which makes change hammers and shaft more easily. The wearing parts are fixed with bolts and disassembled easily.
|Model||Rotor diameter (mm)||Feeding port size (mm)||Feeding size(mm)||Capacity (t/h)||Power(kw)||Dimensions (mm)|
|PC0706 ||700×570 ||618×510 ||≤400 ||50-70 ||75 ||1950×1340×1480 |
|PC0808 ||800×750 ||780×610 ||≤500 ||80-100 ||132 ||2280×1790×1670 |
|PC0910 ||900×1000 ||1070×750 ||≤600 ||150-200 ||110×2 ||2600×2200×1940 |
|PC1012 ||1000×1180 ||1255×810 ||≤650 ||250-300 ||132×2 ||2800×2310×2210 |
|PC1213 ||1200×1280 ||1350×900 ||≤750 ||300-350 ||160×2 ||2970×2580×2510 |
|PC1216 ||1270×1490 ||920 ×1530 ||≤750 ||400-500 ||200×2 ||3070×2840×2580 |
|PC1220 ||1220 ×1950 ||920 ×2000 ||≤750 ||500-600 ||220×2 ||3080×3380×2580 |
|Model||Rotor diameter(mm)||Feeding port size(mm)||Feeding size(mm)||Capacity(t/h)||Power(kw)||Dimensions(mm)|